{"title":"Digital Decoders|ESU|ESU LokSound","description":null,"products":[{"product_id":"esu-93490-loksound-select-6-aux-sound-decoder-programmed-with-qr-90-ton-1550-2400-sounds","title":"ESU, 93490, LokSound, Select 6 AUX Sound Decoder Programmed with QR 90 Ton (1550\/ 2400) Sounds","description":"\u003cp class=\"bodytext\"\u003eWe are proud to present to you the brand-new LokSound Select decoder. The LokSound Select decoder was designed with all our past experience, while considering many suggestions of ESU users.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select is a versatile DCC \u0026amp; DC “Dual Mode” decoder integrating a full-featured, 8 channel sound system, several lighting outputs and a 1.1A motor controller. While the LokSound Select only measures 1.18” x 0.59” (30mm x 15mm), due to its unique thermal design, it does (like all genuine LokSound decoders) not need any heat sinks.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eWe ship the LokSound Select with an 8 pin NMRA connector and a 21MTC connector to make it a “plug \u0026amp; play” decoder. It also contains on board capacitance for smooth operation. For LokSound Select, we offer a comprehensive range of new high-power speakers, rated 4 Ohms.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eOperational modes\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select can be used on conventional “analog” layouts and controlled with a DC power pack, but to benefit from all its features, we highly recommend DCC operation.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select follows all NMRA DCC standards and recommended practices. It can be used with 14, 28 or 128 speed steps, supports two digit (7 bit addresses) as well as “4-digit” addressing. Up to 29 function keys are supported. The LokSound Select can change between DC and DCC operation at any time “on the fly”.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eOf course, the LokSound Select supports all DCC-programming modes including Programming on the Main Track (“POM”). Because of its unique low-power design, the LokSound Select can be programmed on the programming track of all popular DCC systems. No programming track boosters or other circuitry will be needed.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eBy the use of our LokSound Programmer, programming can be even more comfortable by using your computer to adjust the many CVs and settings.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSound\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select comes with a 32 MBit memory chip. The sounds stored therein are our own recordings which were made by using the latest recording equipment and have been digitally re-mastered for the best audio possible. The sounds are transferred to a class “D” audio amplifier via eight polyphonic sound channels. LokSound Select decoders offer the following unique features:\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n \t\u003cli\u003eMultiple whistle and horns: Each LokSound Select offers many whistle \u0026amp; horns. By just changing one CV, you can select your favorite one. This allows an easier adjustment to your model.\u003c\/li\u003e\r\n \t\u003cli\u003ePlayable whistle: The LokSound Select supports a very fast responding whistle function. By just pressing your throttle‘s button, you can really blow the whistle like the real engineer.\u003c\/li\u003e\r\n \t\u003cli\u003e8 channel sound: The LokSound Select can playback up to 8 sounds at the same time. This will result in the most realistic experience available today.\u003c\/li\u003e\r\n \t\u003cli\u003eSynchronized brake squeal: The LokSound Select will synchronize the brake squeal sound with the real movement of the locomotive. No longer will stopped trains have the brake sound still on!\u003c\/li\u003e\r\n \t\u003cli\u003eManual notching: The diesel speed steps can be either manually controlled by function keys or automatically based on the speed.\u003c\/li\u003e\r\n \t\u003cli\u003eIndividual volume control: The volume of all sound effects can be adjusted individually.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"bodytext\"\u003eSteam decoders can produce over 20 sound effects, including the bell, air pump, exhaust chuff, coupler, steam release, cylinder cocks, brake release, side rod clank, blower, injector, Fireman Fred and many more. Synchronizing the steam chuff rate by using two CVs only virtually eliminates the need for a cam, but can of course be connected.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eDiesel decoders can produce over 20 sound effects, including the engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes, fans, brake squeals, coupling and uncoupling, detector sounds, rail clank and many more.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eCustomize your sounds\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eUnlike other manufacturers, LokSound Select offers you two options to customize your engine. The most simple is by using one (!) CV. You can select the prime mover sound, the desired whistle or horn and the bell. Each LokSound Select offers various options on that.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eHowever, if you are still unsatisfied with the result, you may at any time use the famous LokSound Programmer to download new sounds into the LokSound Select. We offer numerous “ready-made” sound packages for easy downloading.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSuperior motor control\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eESU offers load compensation (using B-EMF) since 1999. While other manufacturers seem only to focus on the sound options, the LokSound Select offers the 5th generation of motor control resulting in a smooth and precise locomotive operation. We at ESU believe that good motor control is mandatory for model trains: Even the best sound is worthless if the locomotive running is not smooth!\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eRegardless if you are using coreless or conventional DC motors, the LokSound Select’s unique auto-detection function can measure the characteristics and adjust the internal settings. There is no need to fiddle around with many CVs to adjust to the engine. Due to Dynamic Drive Control (DDC) you can limit the influence of the load control and operate really smoothly around the depot and over turnouts, while on the main, when going uphill the engine prototypically slows down.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eShining lighting effects\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select Direct and the LokSound Select H0-Decoder with 8 pins include 6 (!) outputs, the LokSound Select Micro includes 4 outputs, the LokSound Select H0 21MTC has 4 powered and 4 logic outputs and the LokSound Select L comes with 9 outputs with 0.25A current for H0 Decoders (0.18A for the \"Micro Decoders\") that can be allocated individually to a light effect, which simulates the light patterns of many popular warning beacons. Besides D312 Rotary beacon, strobe and alternate flashing, there is a firebox flicker, smart flicker, Mars light, Gyralight, Ditch lights (two types), Oscillating Headlights, Stratolight and many more.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe Rule 17 dimmable headlight can be either controlled automatically or by function button. A LED brightness correction feature now also allows using LEDs for lighting effects. This is an important feature since LEDs do behave different than bulbs.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSafeguard\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eAll function outputs and the motor connection are protected against overload and short-circuit. We want you to enjoy your LokSound decoder as long as possible.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eBuilt-in future\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eLokSound Select decoders are firmware-updatable. This means, the internal decoder software can be replaced by new versions, if necessary. For this, you only need an ESU LokSound Programmer and a PC.\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089132585065,"sku":null,"price":195.0,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-95455-loksound-select-6-aux-sound-decoder-programmed-with-wuiske-8cyl-645e-ft-sounds","title":"ESU, 95455, LokSound Select 6 AUX sound decoder programmed with Wuiske 8cyl 645E FT sounds","description":"\u003cp class=\"bodytext\"\u003eWe are proud to present to you the brand-new LokSound Select decoder. The LokSound Select decoder was designed with all our past experience, while considering many suggestions of ESU users.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select is a versatile DCC \u0026amp; DC “Dual Mode” decoder integrating a full-featured, 8 channel sound system, several lighting outputs and a 1.1A motor controller. While the LokSound Select only measures 1.18” x 0.59” (30mm x 15mm), due to its unique thermal design, it does (like all genuine LokSound decoders) not need any heat sinks.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eWe ship the LokSound Select with an 8 pin NMRA connector and a 21MTC connector to make it a “plug \u0026amp; play” decoder. It also contains on board capacitance for smooth operation. For LokSound Select, we offer a comprehensive range of new high-power speakers, rated 4 Ohms.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eOperational modes\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select can be used on conventional “analog” layouts and controlled with a DC power pack, but to benefit from all its features, we highly recommend DCC operation.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select follows all NMRA DCC standards and recommended practices. It can be used with 14, 28 or 128 speed steps, supports two digit (7 bit addresses) as well as “4-digit” addressing. Up to 29 function keys are supported. The LokSound Select can change between DC and DCC operation at any time “on the fly”.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eOf course, the LokSound Select supports all DCC-programming modes including Programming on the Main Track (“POM”). Because of its unique low-power design, the LokSound Select can be programmed on the programming track of all popular DCC systems. No programming track boosters or other circuitry will be needed.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eBy the use of our LokSound Programmer, programming can be even more comfortable by using your computer to adjust the many CVs and settings.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSound\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select comes with a 32 MBit memory chip. The sounds stored therein are our own recordings which were made by using the latest recording equipment and have been digitally re-mastered for the best audio possible. The sounds are transferred to a class “D” audio amplifier via eight polyphonic sound channels. LokSound Select decoders offer the following unique features:\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n \t\u003cli\u003eMultiple whistle and horns: Each LokSound Select offers many whistle \u0026amp; horns. By just changing one CV, you can select your favorite one. This allows an easier adjustment to your model.\u003c\/li\u003e\r\n \t\u003cli\u003ePlayable whistle: The LokSound Select supports a very fast responding whistle function. By just pressing your throttle‘s button, you can really blow the whistle like the real engineer.\u003c\/li\u003e\r\n \t\u003cli\u003e8 channel sound: The LokSound Select can playback up to 8 sounds at the same time. This will result in the most realistic experience available today.\u003c\/li\u003e\r\n \t\u003cli\u003eSynchronized brake squeal: The LokSound Select will synchronize the brake squeal sound with the real movement of the locomotive. No longer will stopped trains have the brake sound still on!\u003c\/li\u003e\r\n \t\u003cli\u003eManual notching: The diesel speed steps can be either manually controlled by function keys or automatically based on the speed.\u003c\/li\u003e\r\n \t\u003cli\u003eIndividual volume control: The volume of all sound effects can be adjusted individually.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"bodytext\"\u003eSteam decoders can produce over 20 sound effects, including the bell, air pump, exhaust chuff, coupler, steam release, cylinder cocks, brake release, side rod clank, blower, injector, Fireman Fred and many more. Synchronizing the steam chuff rate by using two CVs only virtually eliminates the need for a cam, but can of course be connected.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eDiesel decoders can produce over 20 sound effects, including the engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes, fans, brake squeals, coupling and uncoupling, detector sounds, rail clank and many more.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eCustomize your sounds\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eUnlike other manufacturers, LokSound Select offers you two options to customize your engine. The most simple is by using one (!) CV. You can select the prime mover sound, the desired whistle or horn and the bell. Each LokSound Select offers various options on that.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eHowever, if you are still unsatisfied with the result, you may at any time use the famous LokSound Programmer to download new sounds into the LokSound Select. We offer numerous “ready-made” sound packages for easy downloading.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSuperior motor control\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eESU offers load compensation (using B-EMF) since 1999. While other manufacturers seem only to focus on the sound options, the LokSound Select offers the 5th generation of motor control resulting in a smooth and precise locomotive operation. We at ESU believe that good motor control is mandatory for model trains: Even the best sound is worthless if the locomotive running is not smooth!\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eRegardless if you are using coreless or conventional DC motors, the LokSound Select’s unique auto-detection function can measure the characteristics and adjust the internal settings. There is no need to fiddle around with many CVs to adjust to the engine. Due to Dynamic Drive Control (DDC) you can limit the influence of the load control and operate really smoothly around the depot and over turnouts, while on the main, when going uphill the engine prototypically slows down.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eShining lighting effects\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select Direct and the LokSound Select H0-Decoder with 8 pins include 6 (!) outputs, the LokSound Select Micro includes 4 outputs, the LokSound Select H0 21MTC has 4 powered and 4 logic outputs and the LokSound Select L comes with 9 outputs with 0.25A current for H0 Decoders (0.18A for the \"Micro Decoders\") that can be allocated individually to a light effect, which simulates the light patterns of many popular warning beacons. Besides D312 Rotary beacon, strobe and alternate flashing, there is a firebox flicker, smart flicker, Mars light, Gyralight, Ditch lights (two types), Oscillating Headlights, Stratolight and many more.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe Rule 17 dimmable headlight can be either controlled automatically or by function button. A LED brightness correction feature now also allows using LEDs for lighting effects. This is an important feature since LEDs do behave different than bulbs.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSafeguard\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eAll function outputs and the motor connection are protected against overload and short-circuit. We want you to enjoy your LokSound decoder as long as possible.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eBuilt-in future\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eLokSound Select decoders are firmware-updatable. This means, the internal decoder software can be replaced by new versions, if necessary. For this, you only need an ESU LokSound Programmer and a PC.\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089132617833,"sku":null,"price":165.0,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-73100-loksound-select-direct-micro-sound-decoder-generic-sound","title":"ESU 73100 LokSound Select Direct Micro sound decoder generic sound","description":"\u003cp class=\"bodytext\"\u003eWorking with Narrow Hood units in N scale? The NEW 6 output function LokSound Select Direct Micro decoder was designed with this purpose in mind!\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select is a versatile DCC \u0026amp; DC “Dual Mode” decoder integrating a full-featured, 8 channel sound system, and a .75A motor controller. The NEW LokSound Select Direct Micro only measures 2.60 inch long x .32 inch wide by only .18 tall (66mm x 8.2mm x 4.5mm) making it the world´s narrowest LokSound decoder! And, one of the only 6 function output Micro Sound decoders on the market!\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eWe ship the LokSound Select Direct Micro in 2 form factors. A Retail version which will drop into many pre-2016 Atlas and InterMountain Locos, (and others with minor modification) and an OEM version which is made as an upgrade to DC Locos that came from the factory with ESU Sound. This allows flexible installation in your favorite N scale models. Due to its unique thermal design, it (like all genuine LokSound decoders) does not need any heat sinks.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eFor LokSound Select decoders, we offer a comprehensive range of new high-power speakers. This includes our 50321 11mm x15mm cell phone type speakers!\u003c\/p\u003e\r\n\r\n\u003ch2\u003eOperational modes\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select can be used on conventional “analog” layouts and controlled with a DC power pack, but to benefit from all its features, we highly recommend DCC operation.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select follows all NMRA DCC standards and recommended practices. It can be used with 14, 28 or 128 speed steps, supports two digit (7 bit addresses) as well as “4-digit” addressing. Up to 29 function keys are supported. The LokSound Select can change between DC and DCC operation at any time “on the fly”.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eOf course, the LokSound Select supports all DCC-programming modes including Programming on the Main Track (“POM”). Because of its unique low-power design, the LokSound Select can be programmed on the programming track of all popular DCC systems. No programming track boosters or other circuitry will be needed.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eBy the use of our LokSound Programmer, programming can be even more comfortable by using your computer to adjust the many CVs and settings.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSound\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select comes with a 32 MBit memory chip. The sounds stored therein are our own recordings which were made by using the latest recording equipment and have been digitally re-mastered for the best audio possible. The sounds are transferred to a class “D” audio amplifier via eight polyphonic sound channels. LokSound Select decoders offer the following unique features:\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n \t\u003cli\u003eMultiple whistle and horns: Each LokSound Select offers many whistle \u0026amp; horns. By just changing one CV, you can select your favorite one. This allows an easier adjustment to your model.\u003c\/li\u003e\r\n \t\u003cli\u003ePlayable horn: The LokSound Select supports a very fast responding horn function. By just pressing your throttle‘s button, you can really blow the whistle like the real engineer.\u003c\/li\u003e\r\n \t\u003cli\u003e8 channel sound: The LokSound Select can playback up to 8 sounds at the same time. This will result in the most realistic experience available today.\u003c\/li\u003e\r\n \t\u003cli\u003eSynchronized brake squeal: The LokSound Select will synchronize the brake squeal sound with the real movement of the locomotive. No longer will stopped trains have the brake sound still on!\u003c\/li\u003e\r\n \t\u003cli\u003e“Full Throttle Features”: The diesel speed steps can be either manually controlled by function keys or automatically based on the speed.\u003c\/li\u003e\r\n \t\u003cli\u003eIndividual volume control: The volume of all sound effects can be adjusted individually.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"bodytext\"\u003eDiesel decoders can produce over 20 sound effects, including the engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes, fans, brake squeals, coupling and uncoupling, detector sounds, rail clank and many more.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eCustomize your sounds\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eUnlike other manufacturers, LokSound Select offers you two options to customize your engine. The most simple is by using one (!) CV. You can select the prime mover sound, the desired whistle or horn and the bell. Each LokSound Select offers various options on that.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eHowever, if you are still unsatisfied with the result, you may at any time use the famous LokSound Programmer to download new sounds into the LokSound Select. We offer numerous “ready-made” sound packages for easy downloading.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSuperior motor control\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eESU offers load compensation (using B-EMF) since 1999. While other manufacturers seem only to focus on the sound options, the LokSound Select offers the 5th generation of motor control resulting in a smooth and precise locomotive operation. We at ESU believe that good motor control is mandatory for model trains: Even the best sound is worthless if the locomotive running is not smooth!\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eRegardless if you are using coreless or conventional DC motors, the LokSound Select’s unique auto-detection function can measure the characteristics and adjust the internal settings. There is no need to fiddle around with many CVs to adjust to the engine. Due to Dynamic Drive Control (DDC) you can limit the influence of the load control and operate really smoothly around the depot and over turnouts, while on the main, when going uphill the engine prototypically slows down.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eShining lighting effects\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eLokSound Select Direct Micro decoders have 6 function outputs with the possibility of using constant current of 50mA each. These outputs can be assigned individually. All important light functions like Flashing ditchlights, Gyrolight, Mars light, and so on are provided including an individual adjustment of brightness for each function. Besides D312 Rotary beacon, strobe and alternate flashing, Mars light, Gyralight, Ditch lights (two types), Oscillating Headlights, Stratolight and many more.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe Rule 17 dimmable headlight can be either controlled automatically or by function button. A LED mode brightness correction feature now also allows using LEDs for lighting effects. This is an important feature since LEDs do behave different than bulbs. (Pulse Width Modulation)\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSafeguard\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eAll function outputs and the motor connection are protected against overload and short-circuit. We want you to enjoy your LokSound decoder as long as possible.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eBuilt-in Futures\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eLokSound Select decoders are firmware-updatable. This means, the internal decoder software can be replaced by new versions, if necessary. For this, you only need an ESU LokSound Programmer and a PC.\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089132650601,"sku":null,"price":165.0,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-73900-loksound-select-4-aux-decoder-ready-for-programming-21-pin-version","title":"ESU, 73900, LokSound Select 4 Aux. Decoder. Ready for Programming 21 pin version","description":"\u003cp class=\"bodytext\"\u003eWe are proud to present to you the brand-new LokSound Select decoder. The LokSound Select decoder was designed with all our past experience, while considering many suggestions of ESU users.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select is a versatile DCC \u0026amp; DC “Dual Mode” decoder integrating a full-featured, 8 channel sound system, several lighting outputs and a 1.1A motor controller. While the LokSound Select only measures 1.18” x 0.59” (30mm x 15mm), due to its unique thermal design, it does (like all genuine LokSound decoders) not need any heat sinks.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eWe ship the LokSound Select with an 8 pin NMRA connector and a 21MTC connector to make it a “plug \u0026amp; play” decoder. It also contains on board capacitance for smooth operation. For LokSound Select, we offer a comprehensive range of new high-power speakers, rated 4 Ohms.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eOperational modes\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select can be used on conventional “analog” layouts and controlled with a DC power pack, but to benefit from all its features, we highly recommend DCC operation.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select follows all NMRA DCC standards and recommended practices. It can be used with 14, 28 or 128 speed steps, supports two digit (7 bit addresses) as well as “4-digit” addressing. Up to 29 function keys are supported. The LokSound Select can change between DC and DCC operation at any time “on the fly”.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eOf course, the LokSound Select supports all DCC-programming modes including Programming on the Main Track (“POM”). Because of its unique low-power design, the LokSound Select can be programmed on the programming track of all popular DCC systems. No programming track boosters or other circuitry will be needed.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eBy the use of our LokSound Programmer, programming can be even more comfortable by using your computer to adjust the many CVs and settings.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSound\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select comes with a 32 MBit memory chip. The sounds stored therein are our own recordings which were made by using the latest recording equipment and have been digitally re-mastered for the best audio possible. The sounds are transferred to a class “D” audio amplifier via eight polyphonic sound channels. LokSound Select decoders offer the following unique features:\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n \t\u003cli\u003eMultiple whistle and horns: Each LokSound Select offers many whistle \u0026amp; horns. By just changing one CV, you can select your favorite one. This allows an easier adjustment to your model.\u003c\/li\u003e\r\n \t\u003cli\u003ePlayable whistle: The LokSound Select supports a very fast responding whistle function. By just pressing your throttle‘s button, you can really blow the whistle like the real engineer.\u003c\/li\u003e\r\n \t\u003cli\u003e8 channel sound: The LokSound Select can playback up to 8 sounds at the same time. This will result in the most realistic experience available today.\u003c\/li\u003e\r\n \t\u003cli\u003eSynchronized brake squeal: The LokSound Select will synchronize the brake squeal sound with the real movement of the locomotive. No longer will stopped trains have the brake sound still on!\u003c\/li\u003e\r\n \t\u003cli\u003eManual notching: The diesel speed steps can be either manually controlled by function keys or automatically based on the speed.\u003c\/li\u003e\r\n \t\u003cli\u003eIndividual volume control: The volume of all sound effects can be adjusted individually.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"bodytext\"\u003eSteam decoders can produce over 20 sound effects, including the bell, air pump, exhaust chuff, coupler, steam release, cylinder cocks, brake release, side rod clank, blower, injector, Fireman Fred and many more. Synchronizing the steam chuff rate by using two CVs only virtually eliminates the need for a cam, but can of course be connected.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eDiesel decoders can produce over 20 sound effects, including the engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes, fans, brake squeals, coupling and uncoupling, detector sounds, rail clank and many more.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eCustomize your sounds\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eUnlike other manufacturers, LokSound Select offers you two options to customize your engine. The most simple is by using one (!) CV. You can select the prime mover sound, the desired whistle or horn and the bell. Each LokSound Select offers various options on that.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eHowever, if you are still unsatisfied with the result, you may at any time use the famous LokSound Programmer to download new sounds into the LokSound Select. We offer numerous “ready-made” sound packages for easy downloading.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSuperior motor control\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eESU offers load compensation (using B-EMF) since 1999. While other manufacturers seem only to focus on the sound options, the LokSound Select offers the 5th generation of motor control resulting in a smooth and precise locomotive operation. We at ESU believe that good motor control is mandatory for model trains: Even the best sound is worthless if the locomotive running is not smooth!\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eRegardless if you are using coreless or conventional DC motors, the LokSound Select’s unique auto-detection function can measure the characteristics and adjust the internal settings. There is no need to fiddle around with many CVs to adjust to the engine. Due to Dynamic Drive Control (DDC) you can limit the influence of the load control and operate really smoothly around the depot and over turnouts, while on the main, when going uphill the engine prototypically slows down.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eShining lighting effects\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select Direct and the LokSound Select H0-Decoder with 8 pins include 6 (!) outputs, the LokSound Select Micro includes 4 outputs, the LokSound Select H0 21MTC has 4 powered and 4 logic outputs and the LokSound Select L comes with 9 outputs with 0.25A current for H0 Decoders (0.18A for the \"Micro Decoders\") that can be allocated individually to a light effect, which simulates the light patterns of many popular warning beacons. Besides D312 Rotary beacon, strobe and alternate flashing, there is a firebox flicker, smart flicker, Mars light, Gyralight, Ditch lights (two types), Oscillating Headlights, Stratolight and many more.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe Rule 17 dimmable headlight can be either controlled automatically or by function button. A LED brightness correction feature now also allows using LEDs for lighting effects. This is an important feature since LEDs do behave different than bulbs.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSafeguard\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eAll function outputs and the motor connection are protected against overload and short-circuit. We want you to enjoy your LokSound decoder as long as possible.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eBuilt-in future\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eLokSound Select decoders are firmware-updatable. This means, the internal decoder software can be replaced by new versions, if necessary. For this, you only need an ESU LokSound Programmer and a PC.\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089132683369,"sku":null,"price":165.0,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-54499-loksound-v4-0-universal-sound-for-reprogramming-21-pin","title":"ESU 54499 LokSound V4.0 \"Universal Sound for reprogramming\" 21 pin","description":"\u003cp class=\"bodytext\"\u003eThere has been a lot of reviews about our LokSound decoder. They do their work worldwide in locos and provide a maximum of fun, so we expect you to expect more from us (as being the pioneer in this field) than a simple extension of existing products. When we introduce the LokSound V4.0 decoder today, which is the fourth generation after its great grandfather „LokSound Classic“.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eOur new LokSound decoder will convince you once more with its inner values.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound decoder is still a combination of driving decoder and sound module on one PCB. You can install it in nearly every loco in H0 and 0 scale according to its dimensions of 30mm in length and a width of 15mm and so be able to control driving, light and sound.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eLokSound V4.0 decoders are offered with all established plugs, either with the 8-pin NEM 652 connector, the 6-pin NEM651 connector and the PluX12 connector or the wireless versiones with either the 21MTC interface (NEM660) or PluX16 or PluX22.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eAll LokSound decoders are delivered with 23mm speakers.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eOperation modes\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound V4.0 recognises DCC, Selectrix® and the Motorola® protocol. It can be operated with 14, 28 or 128 drive steps or on analogue DC layouts in DCC mode.You can assign the decoders to 2-digit, 3-digit (1-127) or 4-digit (1-9999) addresses as well as a consist address.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe Motorola®-protocol provides the operation of the LokSound V4.0 decoders with Märklin® control stations 6020®, 6021®, delta®, mobile station® and central station®. The decoders can be used with the addresses 01 – 255 on this mode. A second address provides the possibility to use the function keys F5 to F8.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe Selectrix® protocol provides the possibility to use LokSound V4.0 decoders with this also established system. All established DCC brake systems like the well-known Lenz LG100, but also the new Lenz® ABC brake units with asymmetrical DCC signal are recognised as well as the braking on DC (with switched polarity) or on Selectrix® diode brake systems. You can also use the well-known Märklin® brake system in DCC-mode.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eOf course, our top decoder is able to determine a constant braking distance, so that your locos stop in front of the red signal, no matter what speed your loco is at.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eLokSound V4.0 decoders are also able to operate on analogue DC and AC layouts.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe decoders can switch automatically between all modes (AC, Motorola®, DC, DCC, Selectrix®) during operation. This is important if some parts of your layout work with analogue control (e.g. fiddle yards).\u003c\/p\u003e\r\n\r\n\u003ch2\u003eMotor control\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eYou expect an excellent motor control from a LokSound Decoder and deservedly so! LokSound V4.0 is equipped with the further improved 5th generation of load control. You can adjust the control frequency with a basic frequency of 40kHz adaptively. So many motors will run even better and softer. The 10 Bit A\/D convertor makes it possible to drive your loco very slow on the tracks.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eYou can determine a limitation of the load control‘s influence with the Dynamic Drive Control (DDC) to control very accurately in station or shunting switch areas. Besides, uphill driving appears very natural with it.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe decoder‘s load control is suitable for all common motors, no matter if by ROCO®, Fleischmann®, Brawa®, Mehano®, Bemo®, Märklin®, Faulhaber® or Maxon®. You can also use all-current motors as long as you replace the field winding by a HAMO Magnet.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eConstant current of 1.1A continuous current are more than enough for the motors mentioned above and provide enough power even for long trains.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eSoftDrive® Sinus motors, which are often used on Märklin® locos can also be controlled by the LokSound V4.0 decoders.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe new serial communication protocol provides from now on the operation on Trix®-locos.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSound\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe most important element of the new LokSound V4.0 decoders is the sound chip. This is why we have equipped the LokSound V4.0 with an enormous memory of 32 MBit to save up to 276 seconds of original sounds.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound V4.0 works with 8 polyphonic channels, i.e. that the decoder is able to play up to 8 different sounds simultaneously, using the 16-Bit mixer and the nearly noiseless D\/A convertor.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eSo we can provide a much better monitoring of the original locomotive´s complex elements as it is possible to combine several channels.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eYou‘ll recognise the difference at once! The sounds will be amplified up to three times louder than before by using a new digital „class D“ amplifier.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eWe also changed from the old type of speakers to speakers with an impedance of 4 Ohms. Use our provided stock of new developed speakers!\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eAll single sounds of the LokSound V4.0 can be mixed in volume individually on nearly every digital control station.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe new super flexible sound engine without static schedule provides a very prototypical simulation of all railroad vehicles.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eAnalogue mode\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eLokSound V4.0 decoders can be used on DC as well as on AC layouts. The motor and the synchronisation of all driving-, sound- and light functions will be controlled in analogue mode, too!\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eSo, model railroaders without digital systems can enjoy the LokSounds, despite the sounds on function keys.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eFunctions\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eLokSound V4.0 decoders have 4 function outputs with the possibility of using constant current of 250mA. These outputs can be assigned individually. Apart from that, there are two more non-amplified outputs with logic level. You can use those in combination with fitting adaptor PCBs (e.g. ESU 51968) to control more light or special physical functions. All important light functions like Flash, Gyrolight, Mars light, fire box and so\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eon are provided including the individual adjustment of brightness for each function.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eOf course, the decoders provide automatic coupling and decoupling for couplers by Roco®, Krois® and Telex® and from now on even a full beaming head light function.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LED mode controls the right light effects when using LEDs.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSafe operation\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eIf desired it is possible to connect a PowerPack (ESU Art.No. 54670) to the LokSound V4.0, as to all other ESU decoders of the 4th generation. This energy storage continues to supply the decoder with energy if the power consumption is not isn´t optimal due to dirty tracks.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eRailComPlus®\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eA very important function of the LokSound V4.0 decoder is the integrated \u003ca class=\"internal-link\" href=\"http:\/\/www.esu.eu\/en\/support\/white-papers\/railcomplusr\/\"\u003eRailComPlus®\u003c\/a\u003e function. Your locos will be recognised automatically by an appropriate digital command station fast as lightning and will receive, if needed, a new address. Forget about the cumbersome typing and programming!\u003c\/p\u003e\r\n\r\n\u003ch2\u003eProtection\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eOf course, all function outputs and the motor current output are overload protected. We want you to have fun with your decoder as long as possible!\u003c\/p\u003e\r\n\r\n\u003ch2\u003eFuture built-in\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eYou can update the firmware of the LokSound decoders. This means, the internal software on the decoder‘s memory can be replaced by new versions if necessary. You‘ll simply need the ESU LokProgrammer and a PC.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSound variations\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eESU, as the technologic and market leader takes your requirements for sound very seriously. There are already more than 200 sound variations available for the LokSound V4.0\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eESU is extending the sound library all the time and provides all sounds on our homepage for free download.\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089132716137,"sku":null,"price":195.0,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-54800-loksound-micro-v4-0-universal-sound-ready-for-reprogramming-6-pin-plug","title":"ESU 54800 LokSound Micro V4.0 \"Universal Sound ready for Reprogramming\" 6 Pin Plug","description":"\u003cp class=\"bodytext\"\u003eThere has been a lot of reviews about our LokSound decoder. They do their work worldwide in locos and provide a maximum of fun, so we expect you to expect more from us (as being the pioneer in this field) than a simple extension of existing products. When we introduce the LokSound V4.0 decoder today, which is the fourth generation after its great grandfather „LokSound Classic“.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eOur new LokSound decoder will convince you once more with its inner values.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound decoder is still a combination of driving decoder and sound module on one PCB. You can install it in nearly every loco in H0 and 0 scale according to its dimensions of 30mm in length and a width of 15mm and so be able to control driving, light and sound.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eLokSound V4.0 decoders are offered with all established plugs, either with the 8-pin NEM 652 connector, the 6-pin NEM651 connector and the PluX12 connector or the wireless versiones with either the 21MTC interface (NEM660) or PluX16 or PluX22.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eAll LokSound decoders are delivered with 23mm speakers.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eOperation modes\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound V4.0 recognises DCC, Selectrix® and the Motorola® protocol. It can be operated with 14, 28 or 128 drive steps or on analogue DC layouts in DCC mode.You can assign the decoders to 2-digit, 3-digit (1-127) or 4-digit (1-9999) addresses as well as a consist address.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe Motorola®-protocol provides the operation of the LokSound V4.0 decoders with Märklin® control stations 6020®, 6021®, delta®, mobile station® and central station®. The decoders can be used with the addresses 01 – 255 on this mode. A second address provides the possibility to use the function keys F5 to F8.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe Selectrix® protocol provides the possibility to use LokSound V4.0 decoders with this also established system. All established DCC brake systems like the well-known Lenz LG100, but also the new Lenz® ABC brake units with asymmetrical DCC signal are recognised as well as the braking on DC (with switched polarity) or on Selectrix® diode brake systems. You can also use the well-known Märklin® brake system in DCC-mode.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eOf course, our top decoder is able to determine a constant braking distance, so that your locos stop in front of the red signal, no matter what speed your loco is at.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eLokSound V4.0 decoders are also able to operate on analogue DC and AC layouts.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe decoders can switch automatically between all modes (AC, Motorola®, DC, DCC, Selectrix®) during operation. This is important if some parts of your layout work with analogue control (e.g. fiddle yards).\u003c\/p\u003e\r\n\r\n\u003ch2\u003eMotor control\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eYou expect an excellent motor control from a LokSound Decoder and deservedly so! LokSound V4.0 is equipped with the further improved 5th generation of load control. You can adjust the control frequency with a basic frequency of 40kHz adaptively. So many motors will run even better and softer. The 10 Bit A\/D convertor makes it possible to drive your loco very slow on the tracks.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eYou can determine a limitation of the load control‘s influence with the Dynamic Drive Control (DDC) to control very accurately in station or shunting switch areas. Besides, uphill driving appears very natural with it.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe decoder‘s load control is suitable for all common motors, no matter if by ROCO®, Fleischmann®, Brawa®, Mehano®, Bemo®, Märklin®, Faulhaber® or Maxon®. You can also use all-current motors as long as you replace the field winding by a HAMO Magnet.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eConstant current of 1.1A continuous current are more than enough for the motors mentioned above and provide enough power even for long trains.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eSoftDrive® Sinus motors, which are often used on Märklin® locos can also be controlled by the LokSound V4.0 decoders.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe new serial communication protocol provides from now on the operation on Trix®-locos.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSound\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe most important element of the new LokSound V4.0 decoders is the sound chip. This is why we have equipped the LokSound V4.0 with an enormous memory of 32 MBit to save up to 276 seconds of original sounds.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound V4.0 works with 8 polyphonic channels, i.e. that the decoder is able to play up to 8 different sounds simultaneously, using the 16-Bit mixer and the nearly noiseless D\/A convertor.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eSo we can provide a much better monitoring of the original locomotive´s complex elements as it is possible to combine several channels.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eYou‘ll recognise the difference at once! The sounds will be amplified up to three times louder than before by using a new digital „class D“ amplifier.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eWe also changed from the old type of speakers to speakers with an impedance of 4 Ohms. Use our provided stock of new developed speakers!\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eAll single sounds of the LokSound V4.0 can be mixed in volume individually on nearly every digital control station.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe new super flexible sound engine without static schedule provides a very prototypical simulation of all railroad vehicles.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eAnalogue mode\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eLokSound V4.0 decoders can be used on DC as well as on AC layouts. The motor and the synchronisation of all driving-, sound- and light functions will be controlled in analogue mode, too!\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eSo, model railroaders without digital systems can enjoy the LokSounds, despite the sounds on function keys.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eFunctions\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eLokSound V4.0 decoders have 4 function outputs with the possibility of using constant current of 250mA. These outputs can be assigned individually. Apart from that, there are two more non-amplified outputs with logic level. You can use those in combination with fitting adaptor PCBs (e.g. ESU 51968) to control more light or special physical functions. All important light functions like Flash, Gyrolight, Mars light, fire box and so\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eon are provided including the individual adjustment of brightness for each function.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eOf course, the decoders provide automatic coupling and decoupling for couplers by Roco®, Krois® and Telex® and from now on even a full beaming head light function.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LED mode controls the right light effects when using LEDs.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSafe operation\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eIf desired it is possible to connect a PowerPack (ESU Art.No. 54670) to the LokSound V4.0, as to all other ESU decoders of the 4th generation. This energy storage continues to supply the decoder with energy if the power consumption is not isn´t optimal due to dirty tracks.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eRailComPlus®\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eA very important function of the LokSound V4.0 decoder is the integrated \u003ca class=\"internal-link\" href=\"http:\/\/www.esu.eu\/en\/support\/white-papers\/railcomplusr\/\"\u003eRailComPlus®\u003c\/a\u003e function. Your locos will be recognised automatically by an appropriate digital command station fast as lightning and will receive, if needed, a new address. Forget about the cumbersome typing and programming!\u003c\/p\u003e\r\n\r\n\u003ch2\u003eProtection\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eOf course, all function outputs and the motor current output are overload protected. We want you to have fun with your decoder as long as possible!\u003c\/p\u003e\r\n\r\n\u003ch2\u003eFuture built-in\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eYou can update the firmware of the LokSound decoders. This means, the internal software on the decoder‘s memory can be replaced by new versions if necessary. You‘ll simply need the ESU LokProgrammer and a PC.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSound variations\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eESU, as the technologic and market leader takes your requirements for sound very seriously. There are already more than 200 sound variations available for the LokSound V4.0\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eESU is extending the sound library all the time and provides all sounds on our homepage for free download.\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089132748905,"sku":null,"price":195.0,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-58814-loksound-5-micro-dcc-mm-sx-m4-blank-decoder-plux16-with-speaker-11x15mm-gauge-n-ho","title":"ESU 58814 LokSound 5 Micro DCC\/MM\/SX\/M4 \"Blank Decoder\" PluX16 with Speaker 11x15mm Gauge: N-HO","description":"\u003cdiv id=\"jqtabs-5550-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All LokSound decoders are equipped with a Next18 interface and are available with adapter plugs to suit all popular digital interface types. The decoder is supplied with an 11mm x 15mm sugar cube speaker as well as a sound enclosure set.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Please note the LokSound 5 DCC decoder does not come with a speaker.\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eOperating modes\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 micro is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThis decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eMotorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Control Unit 6021.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe M4 protocol supports the automatic registration on mfx® compatible central units. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound  \u003c\/span\u003edecoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 micro decoder is also suitable for analogue DC and AC (!) layouts.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eSound\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 micro decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit \/ 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A double class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eFunctions\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eDespite its small dimensions the LokSound 5 micro decoder has at least 6 amplified function outputs as well as one logic output. There are two more logic outputs on the Next18 interface, which alternately may be employed to control RC servos. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers. \u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eMotor control\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eMotor control of the LokSound 5 micro has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 micro decoder supplies sufficient motor current (up to 0.75 A) for the intended applications.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eLokSound 5 micro DCC\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 Micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089375789161,"sku":"4044645588147","price":220.7,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-73199-loksound-select-direct-micro-sound-decoder-universal-sound-ready-for-programming","title":"ESU 73199 LokSound Select Direct Micro Sound Decoder \"Universal sound ready for programming\"","description":"\u003cp class=\"bodytext\"\u003eWorking with Narrow Hood units in N scale? The NEW 6 output function LokSound Select Direct Micro decoder was designed with this purpose in mind!\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select is a versatile DCC \u0026amp; DC “Dual Mode” decoder integrating a full-featured, 8 channel sound system, and a .75A motor controller. The NEW LokSound Select Direct Micro only measures 2.60 inch long x .32 inch wide by only .18 tall (66mm x 8.2mm x 4.5mm) making it the world´s narrowest LokSound decoder! And, one of the only 6 function output Micro Sound decoders on the market!\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eWe ship the LokSound Select Direct Micro in 2 form factors. A Retail version which will drop into many pre-2016 Atlas and InterMountain Locos, (and others with minor modification) and an OEM version which is made as an upgrade to DC Locos that came from the factory with ESU Sound. This allows flexible installation in your favorite N scale models. Due to its unique thermal design, it (like all genuine LokSound decoders) does not need any heat sinks.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eFor LokSound Select decoders, we offer a comprehensive range of new high-power speakers. This includes our 50321 11mm x15mm cell phone type speakers!\u003c\/p\u003e\r\n\r\n\u003ch2\u003eOperational modes\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select can be used on conventional “analog” layouts and controlled with a DC power pack, but to benefit from all its features, we highly recommend DCC operation.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select follows all NMRA DCC standards and recommended practices. It can be used with 14, 28 or 128 speed steps, supports two digit (7 bit addresses) as well as “4-digit” addressing. Up to 29 function keys are supported. The LokSound Select can change between DC and DCC operation at any time “on the fly”.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eOf course, the LokSound Select supports all DCC-programming modes including Programming on the Main Track (“POM”). Because of its unique low-power design, the LokSound Select can be programmed on the programming track of all popular DCC systems. No programming track boosters or other circuitry will be needed.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eBy the use of our LokSound Programmer, programming can be even more comfortable by using your computer to adjust the many CVs and settings.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSound\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound Select comes with a 32 MBit memory chip. The sounds stored therein are our own recordings which were made by using the latest recording equipment and have been digitally re-mastered for the best audio possible. The sounds are transferred to a class “D” audio amplifier via eight polyphonic sound channels. LokSound Select decoders offer the following unique features:\u003c\/p\u003e\r\n\r\n\u003cul\u003e\r\n \t\u003cli\u003eMultiple whistle and horns: Each LokSound Select offers many whistle \u0026amp; horns. By just changing one CV, you can select your favorite one. This allows an easier adjustment to your model.\u003c\/li\u003e\r\n \t\u003cli\u003ePlayable horn: The LokSound Select supports a very fast responding horn function. By just pressing your throttle‘s button, you can really blow the whistle like the real engineer.\u003c\/li\u003e\r\n \t\u003cli\u003e8 channel sound: The LokSound Select can playback up to 8 sounds at the same time. This will result in the most realistic experience available today.\u003c\/li\u003e\r\n \t\u003cli\u003eSynchronized brake squeal: The LokSound Select will synchronize the brake squeal sound with the real movement of the locomotive. No longer will stopped trains have the brake sound still on!\u003c\/li\u003e\r\n \t\u003cli\u003e“Full Throttle Features”: The diesel speed steps can be either manually controlled by function keys or automatically based on the speed.\u003c\/li\u003e\r\n \t\u003cli\u003eIndividual volume control: The volume of all sound effects can be adjusted individually.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp class=\"bodytext\"\u003eDiesel decoders can produce over 20 sound effects, including the engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes, fans, brake squeals, coupling and uncoupling, detector sounds, rail clank and many more.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eCustomize your sounds\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eUnlike other manufacturers, LokSound Select offers you two options to customize your engine. The most simple is by using one (!) CV. You can select the prime mover sound, the desired whistle or horn and the bell. Each LokSound Select offers various options on that.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eHowever, if you are still unsatisfied with the result, you may at any time use the famous LokSound Programmer to download new sounds into the LokSound Select. We offer numerous “ready-made” sound packages for easy downloading.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSuperior motor control\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eESU offers load compensation (using B-EMF) since 1999. While other manufacturers seem only to focus on the sound options, the LokSound Select offers the 5th generation of motor control resulting in a smooth and precise locomotive operation. We at ESU believe that good motor control is mandatory for model trains: Even the best sound is worthless if the locomotive running is not smooth!\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eRegardless if you are using coreless or conventional DC motors, the LokSound Select’s unique auto-detection function can measure the characteristics and adjust the internal settings. There is no need to fiddle around with many CVs to adjust to the engine. Due to Dynamic Drive Control (DDC) you can limit the influence of the load control and operate really smoothly around the depot and over turnouts, while on the main, when going uphill the engine prototypically slows down.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eShining lighting effects\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eLokSound Select Direct Micro decoders have 6 function outputs with the possibility of using constant current of 50mA each. These outputs can be assigned individually. All important light functions like Flashing ditchlights, Gyrolight, Mars light, and so on are provided including an individual adjustment of brightness for each function. Besides D312 Rotary beacon, strobe and alternate flashing, Mars light, Gyralight, Ditch lights (two types), Oscillating Headlights, Stratolight and many more.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe Rule 17 dimmable headlight can be either controlled automatically or by function button. A LED mode brightness correction feature now also allows using LEDs for lighting effects. This is an important feature since LEDs do behave different than bulbs. (Pulse Width Modulation)\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSafeguard\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eAll function outputs and the motor connection are protected against overload and short-circuit. We want you to enjoy your LokSound decoder as long as possible.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eBuilt-in Futures\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eLokSound Select decoders are firmware-updatable. This means, the internal decoder software can be replaced by new versions, if necessary. For this, you only need an ESU LokSound Programmer and a PC.\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089375854697,"sku":"4044645731994","price":168.5,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-58816-loksound-5-micro-dcc-mm-sx-m4-blank-decoder-6-pin-nem651-with-speaker-11x15mm-gauge-n-ho","title":"ESU 58816 LokSound 5 Micro DCC\/MM\/SX\/M4 \"Blank Decoder\" 6 Pin NEM651 with Speaker 11x15mm Gauge: N-HO","description":"\u003cdiv id=\"jqtabs-5550-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All LokSound decoders are equipped with a Next18 interface and are available with adapter plugs to suit all popular digital interface types. The decoder is supplied with an 11mm x 15mm sugar cube speaker as well as a sound enclosure set.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Please note the LokSound 5 DCC decoder does not come with a speaker.\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eOperating modes\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 micro is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThis decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eMotorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Control Unit 6021.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe M4 protocol supports the automatic registration on mfx® compatible central units. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound  \u003c\/span\u003edecoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 micro decoder is also suitable for analogue DC and AC (!) layouts.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eSound\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 micro decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit \/ 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A double class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eFunctions\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eDespite its small dimensions the LokSound 5 micro decoder has at least 6 amplified function outputs as well as one logic output. There are two more logic outputs on the Next18 interface, which alternately may be employed to control RC servos. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers. \u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eMotor control\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eMotor control of the LokSound 5 micro has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 micro decoder supplies sufficient motor current (up to 0.75 A) for the intended applications.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eLokSound 5 micro DCC\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 Micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089375887465,"sku":"4044645588161","price":227.5,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-58818-loksound-5-micro-dcc-mm-sx-m4-blank-decoder-next18-with-speaker-11x15mm-gauge-n-ho","title":"ESU 58818 LokSound 5 Micro DCC\/MM\/SX\/M4 \"Blank Decoder\" Next18 with Speaker 11x15mm Gauge: N-HO","description":"\u003cdiv id=\"jqtabs-5550-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All LokSound decoders are equipped with a Next18 interface and are available with adapter plugs to suit all popular digital interface types. The decoder is supplied with an 11mm x 15mm sugar cube speaker as well as a sound enclosure set.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Please note the LokSound 5 DCC decoder does not come with a speaker.\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eOperating modes\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 micro is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThis decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eMotorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Control Unit 6021.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe M4 protocol supports the automatic registration on mfx® compatible central units. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound  \u003c\/span\u003edecoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 micro decoder is also suitable for analogue DC and AC (!) layouts.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eSound\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 micro decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit \/ 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A double class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eFunctions\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eDespite its small dimensions the LokSound 5 micro decoder has at least 6 amplified function outputs as well as one logic output. There are two more logic outputs on the Next18 interface, which alternately may be employed to control RC servos. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers. \u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eMotor control\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eMotor control of the LokSound 5 micro has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 micro decoder supplies sufficient motor current (up to 0.75 A) for the intended applications.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eLokSound 5 micro DCC\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 Micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089375920233,"sku":"4044645588185","price":291.1,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-58828-loksound-5-micro-dcc-blank-decoder-next18-generic-sound-gauge-n-ho","title":"ESU 58828 LokSound 5 Micro DCC \"Blank Decoder\" Next18 \"Generic Sound\" Gauge: N-HO","description":"\u003cdiv id=\"jqtabs-5550-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All LokSound decoders are equipped with a Next18 interface and are available with adapter plugs to suit all popular digital interface types. The decoder is supplied with an 11mm x 15mm sugar cube speaker as well as a sound enclosure set.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Please note the LokSound 5 DCC decoder does not come with a speaker.\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eOperating modes\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 micro is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThis decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eMotorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Control Unit 6021.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe M4 protocol supports the automatic registration on mfx® compatible central units. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound  \u003c\/span\u003edecoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 micro decoder is also suitable for analogue DC and AC (!) layouts.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eSound\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 micro decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit \/ 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A double class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eFunctions\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eDespite its small dimensions the LokSound 5 micro decoder has at least 6 amplified function outputs as well as one logic output. There are two more logic outputs on the Next18 interface, which alternately may be employed to control RC servos. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers. \u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eMotor control\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eMotor control of the LokSound 5 micro has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 micro decoder supplies sufficient motor current (up to 0.75 A) for the intended applications.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eLokSound 5 micro DCC\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 Micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089375985769,"sku":"4044645588284","price":267.8,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-58820-loksound-5-dcc-micro-8-pin-generic-sound-ready-for-programming-gauge-n-tt-ho","title":"ESU 58820 LokSound 5 DCC Micro 8-pin \"Generic Sound\" Ready For Programming Gauge N TT HO","description":"\u003cdiv id=\"jqtabs-5550-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cdiv id=\"jqtabs-5550-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All LokSound decoders are equipped with a Next18 interface and are available with adapter plugs to suit all popular digital interface types. The decoder is supplied with an 11mm x 15mm sugar cube speaker as well as a sound enclosure set.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Please note the LokSound 5 DCC decoder does not come with a speaker.\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eOperating modes\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 micro is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThis decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eMotorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Control Unit 6021.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe M4 protocol supports the automatic registration on mfx® compatible central units. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound  \u003c\/span\u003edecoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 micro decoder is also suitable for analogue DC and AC (!) layouts.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eSound\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 micro decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit \/ 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A double class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eFunctions\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eDespite its small dimensions the LokSound 5 micro decoder has at least 6 amplified function outputs as well as one logic output. There are two more logic outputs on the Next18 interface, which alternately may be employed to control RC servos. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers. \u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eMotor control\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eMotor control of the LokSound 5 micro has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 micro decoder supplies sufficient motor current (up to 0.75 A) for the intended applications.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eLokSound 5 micro DCC\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 Micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089387913321,"sku":"4044645588208","price":244.6,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-58420-loksound-5-dcc-blank-decoder-8-pin-nem652-gauge-o-ho","title":"ESU 58420 LokSound 5 DCC \"blank decoder\" 8-pin NEM652 Gauge: O HO","description":"\u003cdiv id=\"jqtabs-5550-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cdiv id=\"jqtabs-5900-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cdiv id=\"jqtabs-5900-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any H0 or 0 gauge locomotive.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eLokSound 5 decoders are available with all popular interface types and are supplied with a sugar cube speaker (11 mm x 15 mm) and a sound enclosure.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Please note the LokSound 5 DCC decoder does not come with a speaker.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eOperating modes\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eLike all products of the LokSound family the LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThis decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eMotorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Central Unit 6021.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe M4 protocol supports the automatic registration on mfx® compatible central units.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSound\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit \/ 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eFunctions\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eWe are quite aware that you want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it.  Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eMotor control\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eMotor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eLokSound 5 DCC\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.\u003c\/p\u003e\r\n\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089387978857,"sku":"4044645584200","price":287.3,"currency_code":"AUD","in_stock":true}]},{"product_id":"esu-58513-loksound-5-xl-dcc-mm-sx-m4-blank-decoder-screw-terminals-gauge-g-i","title":"ESU 58513 LokSound 5 XL DCC\/MM\/SX\/M4 \"Blank Decoder\" Screw Terminals Gauge G\/I","description":"\u003cdiv id=\"jqtabs-5538-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 XL decoder is quite a big piece of equipment. It has to be, because it is intended for use in large scale model railways, e.g. garden railways and 1 gauge models. Its integral PowerPack matching the increased motor power assures reliable operation even on dirty tracks.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 XL measures 51 mm x 40 mm and is available in two different types: Besides the type with robust screw type terminals for installation in older models without an interface socket, there is a version with multi-pin connectors. This version fits into all locomotives where an older type LokSound XL decoder has been installed previously. \u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eOperating modes\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eLike all products of the LokSound family the LokSound 5 XL is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations. The LGB® chain control is capable of handling functions and their respective buttons with older LGB® control systems.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThis decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eMotorola® users benefit from up to 28 speed steps and 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Central Unit 6021.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe M4 protocol supports the automatic registration on mfx® compatible central units. \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 XL decoder supports Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound 5 XL will come to a halt when a Selectrix® braking diode is connected to the circuit. The ABC push-pull feature enables the automatic commuting between two stations.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 XL decoder is also suitable for analogue DC and AC train sets.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eSound\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe LokSound 5 XL decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit \/ 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A dual class D audio power amplifier with up to 2 x 6W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The sound volume can be controlled by means of two separate potentiometers. The huge 128 MBit sound memory assures sufficient storage capacity.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eThe volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eFunctions\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eEvery LokSound 5 XL decoder has 12 amplified function outputs. On top of that there are another 7 logic outputs, which can, if so desired, control four RC servos or SUSI extension modules. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers. 3 sensor inputs may be employed in order to trigger functions.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan lang=\"EN-GB\"\u003eMotor control\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"EN-GB\"\u003eMotor control of the LokSound 5 XL has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 XL decoder supplies ample current for the motor, namely up to 5.0 A (4.0 A continuous).  \u003c\/span\u003eThus the decoder can also handle G gauge locomotives by PIKO® as well as locomotives with two Bühler® or Mabuchi® motors.\u003c\/p\u003e\r\n\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089388011625,"sku":"4044645585139","price":391.9,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-58410-loksound-5-dcc-mm-sx-m4-blank-decoder-8-pin-nem652-w-speaker-gauge-ho-o","title":"ESU, 58410, LokSound 5 DCC\/MM\/SX\/M4, \"Blank Decoder\" 8 Pin, NEM652 w\/ Speaker, Gauge HO, O","description":"\u003cdiv id=\"jqtabs-6210-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cdiv id=\"jqtabs-5900-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any H0 or 0 gauge locomotive.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eLokSound 5 decoders are available with all popular interface types and are supplied with a sugar cube speaker (11 mm x 15 mm) and a sound enclosure.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Please note the LokSound 5 DCC decoder does not come with a speaker.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eOperating modes\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eLike all products of the LokSound family the LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThis decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eMotorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Central Unit 6021.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe M4 protocol supports the automatic registration on mfx® compatible central units.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSound\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit \/ 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eFunctions\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eWe are quite aware that you want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it.  Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eMotor control\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eMotor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eLokSound 5 DCC\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.\u003c\/p\u003e\r\n\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089863180393,"sku":"4044645584101","price":281.6,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-58429-loksound-5-dcc-decoder-21-mtc-generic-sound-ready-for-programming-gauge-ho-o","title":"ESU 58429 LokSound 5 DCC Decoder 21 MTC \"Generic Sound\" Ready For Programming Gauge HO O","description":"\u003cdiv id=\"jqtabs-6210-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cdiv id=\"jqtabs-5900-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any H0 or 0 gauge locomotive.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eLokSound 5 decoders are available with all popular interface types and are supplied with a sugar cube speaker (11 mm x 15 mm) and a sound enclosure.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Please note the LokSound 5 DCC decoder does not come with a speaker.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eOperating modes\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eLike all products of the LokSound family the LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThis decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eMotorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Central Unit 6021.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe M4 protocol supports the automatic registration on mfx® compatible central units.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSound\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit \/ 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eFunctions\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eWe are quite aware that you want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it.  Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eMotor control\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eMotor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eLokSound 5 DCC\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.\u003c\/p\u003e\r\n\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089863213161,"sku":"4044645584293","price":275.0,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-58419-loksound-5-dcc-mm-sx-m4-blank-decoder-21mtc-nem6660-with-speaker-11x15mm-gauge-o-ho","title":"ESU 58419 LokSound 5 DCC\/MM\/SX\/M4 \"Blank Decoder\" 21MTC NEM6660 with Speaker 11x15mm Gauge O HO","description":"\u003cdiv id=\"jqtabs-6210-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cdiv id=\"jqtabs-5900-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any H0 or 0 gauge locomotive.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eLokSound 5 decoders are available with all popular interface types and are supplied with a sugar cube speaker (11 mm x 15 mm) and a sound enclosure.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Please note the LokSound 5 DCC decoder does not come with a speaker.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eOperating modes\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eLike all products of the LokSound family the LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThis decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eMotorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Central Unit 6021.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe M4 protocol supports the automatic registration on mfx® compatible central units.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSound\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit \/ 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eFunctions\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eWe are quite aware that you want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it.  Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eMotor control\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eMotor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eLokSound 5 DCC\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.\u003c\/p\u003e\r\n\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089867473001,"sku":"4044645584194","price":278.6,"currency_code":"AUD","in_stock":true}]},{"product_id":"esu-58741-loksound-5-micro-dcc-kato-usa-blank-decoder-gauge-n","title":"ESU 58741 LokSound 5 Micro DCC Kato USA Blank Decoder Gauge: N","description":"\u003cdiv id=\"jqtabs-5550-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cdiv id=\"jqtabs-6244-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 micro DCC Direct Kato USA has been specially developed for installation in track N vehicles of the Kato USA brand: Most diesel locomotives of this manufacturer are installed in the American model of these decoders instead of the analog board installed as standard. Finally, these models can also be easily retrofitted with a LokSound decoder.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 micro DCC Direct Kato USA with its dimensions of 60.0mm x 10.1mm is a pure DCC decoder and comes without a loudspeaker.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eModes\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 micro DCC Direct Kato USA is a \"pure-bred\" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully to a suitable digital center.It masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 micro DCC Direct Kato USA Decoder detects the Märklin® brake distances as well as ZIMO® HLU \/ ZACK commands or the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An AUTOMATIC ABC commuter train allows automatic commuting between two stations.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 micro DCC Direct Kato USA can be used on analog DC webs.The decoder switches \"on-the-fly\" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSound\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 micro DCC Direct Kato USA Decoder can play up to 12 channels simultaneously. Each channel can be resolved with up to 16 bits \/ 31250 kHz and offers hi-fi quality on its system. There is virtually no difference to the original audible anymore. A Class-D audio output with up to 3W output power controls the speakers, which can have between 4 ohms and 32 ohms impedance. A 128 Mbit sound memory provides enough capacity.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eAll individual noises can be adjusted individually in the volume. The super-flexible sound engine without a rigid schedule allows the exemplary simulation of all conceivable rail tracks.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eFunctions\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eDespite its compact dimensions, the LokSound 5 micro DCC Direct Kato USA is equipped with an enormen number of function outputs. Two directly soldered SMD LEDs are designed for front and rear front and rear head lighting. For older models, two wired LEDs can alternatively be soldered and switched separately. Three further reinforced function outputs are also available. All important lighting functions are available. The brightness of each output can be set separately.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eMotor\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe motor control of the LokSound 5 micro DCC Direct Kato USA has a variable PWM clock frequency from 10kHz to 50kHz, which ensures super-quiet operation, especially for bell anchor motors – the typical \"hum\" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique \"Autotune\" function allows the decoder to be automatically measured against the motor. The LokSound 5 micro DCC Direct Kato USA decoder delivers up to 0.9A motor power.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eOperational reliability\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eA PowerPack can be connected to the LokSound 5 micro DCC Direct Kato USA on request to bridge dirty rail sections.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eProtection\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eOf course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e\r\n\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43092544028777,"sku":"4044645587416","price":200.0,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-58449-loksound-5-dcc-mm-sx-m4-21mtc-mkl-generic-sound-ready-for-programming-gauge-o-ho","title":"ESU 58449 LokSound 5 DCC\/MM\/SX\/M4\" 21MTC \"MKL\" \"Generic Sound\" \"Ready for Programming\" Gauge O HO","description":"\u003cdiv id=\"jqtabs-6210-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cdiv id=\"jqtabs-5900-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any H0 or 0 gauge locomotive.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eLokSound 5 decoders are available with all popular interface types and are supplied with a sugar cube speaker (11 mm x 15 mm) and a sound enclosure.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Please note the LokSound 5 DCC decoder does not come with a speaker.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eOperating modes\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eLike all products of the LokSound family the LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThis decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eMotorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Central Unit 6021.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe M4 protocol supports the automatic registration on mfx® compatible central units.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eSound\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit \/ 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eFunctions\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eWe are quite aware that you want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it.  Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eMotor control\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eMotor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eLokSound 5 DCC\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.\u003c\/p\u003e\r\n\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43092561985641,"sku":"4044645584491","price":277.7,"currency_code":"AUD","in_stock":false}]}],"url":"https:\/\/auroratrains.com.au\/collections\/digital-decoders-esu-esu-loksound.oembed","provider":"Aurora Trains","version":"1.0","type":"link"}