{"title":"Digital Decoders|ESU","description":null,"products":[{"product_id":"esu-53611-lokpilot-standard-dcc-8-pole-plug-per-nem652-wire-harness-4-amplified-outputs","title":"ESU, 53611, LokPilot Standard, DCC, 8 pole plug per NEM652, wire harness, 4 amplified outputs","description":"\u003cp\u003eLokPilot Standard DCC, 8 pole plug per NEM652, wire harness, 4 amplified outputs\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089196941417,"sku":null,"price":39.0,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-53614-lokpilot-standard-21mtc-nem660-interface-dcc-railcomplus","title":"ESU 53614 LokPilot Standard 21MTC NEM660 interface DCC \u0026 RailComPlus","description":"\u003cp\u003eMotor control\u003cbr\u003e\nThe output stage of the LokPilot Standard  decoder generates 0.9A continuous current and easily handles all commonly available DC motors as well as coreless motors; regardless if the motor is by ROCO®, Fleischmann®, Tillig®, Piko®, Brawa®, Bemo®, Faulhaber® or Maxon®. Load control with 20 kHz PWM frequency assures quiet running and lets your locomotives crawl slowly over your layout if you wish them to do so. Load control can be adapted optimally to the particular type of motor by means of three CVs. Due to the simulated inertia the locomotive will not jerk, not even in 14 speed step mode.\u003c\/p\u003e\n\n\u003cp\u003eAnalogue world\u003cbr\u003e\nThe LokPilot Standard can also be used on analogue DC layouts. Therefore the operational area of your locomotives may well be extended to “non-digital” layouts without any problems.\u003c\/p\u003e\n\n\u003cp\u003eFunction outputs\u003cbr\u003e\nThe LokPilot Standard decoder has four function outputs. The decoder with the 21MTC plug has two additional outputs without end stage, which can be utilised for controlling lighting and other functions in conjunction with a suitable adapter board (e.g. ESU 51968). All important lighting functions (e.g. blinking lights, Mars light, flashing light) are available and can be set just like the brightness of each output. The integral shunting mode assists you in delicate shunting manoeuvres in the yard, which is also enhanced by the option to turn off acceleration and deceleration with a function button.\u003cbr\u003e\nThanks to a simplified method for “function mapping” similar to the method described in the NMRA standard all function outputs can easily be assigned to any function button (F0 to F20) according to your requirements.\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089196974185,"sku":null,"price":39.0,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-59616-lokpilot-5-dcc-mm-sx-m4-6-pin-nem651-gauge-ho-o","title":"ESU 59616 LokPilot 5 DCC\/MM\/SX\/M4 6-pin NEM651 Gauge HO O","description":"\u003cp\u003eMotor control\u003cbr\u003e\nThe output stage of the LokPilot Standard  decoder generates 0.9A continuous current and easily handles all commonly available DC motors as well as coreless motors; regardless if the motor is by ROCO®, Fleischmann®, Tillig®, Piko®, Brawa®, Bemo®, Faulhaber® or Maxon®. Load control with 20 kHz PWM frequency assures quiet running and lets your locomotives crawl slowly over your layout if you wish them to do so. Load control can be adapted optimally to the particular type of motor by means of three CVs. Due to the simulated inertia the locomotive will not jerk, not even in 14 speed step mode.\u003c\/p\u003e\n\n\u003cp\u003eAnalogue world\u003cbr\u003e\nThe LokPilot Standard can also be used on analogue DC layouts. Therefore the operational area of your locomotives may well be extended to “non-digital” layouts without any problems.\u003c\/p\u003e\n\n\u003cp\u003eFunction outputs\u003cbr\u003e\nThe LokPilot Standard decoder has four function outputs. The decoder with the 21MTC plug has two additional outputs without end stage, which can be utilised for controlling lighting and other functions in conjunction with a suitable adapter board (e.g. ESU 51968). All important lighting functions (e.g. blinking lights, Mars light, flashing light) are available and can be set just like the brightness of each output. The integral shunting mode assists you in delicate shunting manoeuvres in the yard, which is also enhanced by the option to turn off acceleration and deceleration with a function button.\u003cbr\u003e\nThanks to a simplified method for “function mapping” similar to the method described in the NMRA standard all function outputs can easily be assigned to any function button (F0 to F20) according to your requirements.\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089375953001,"sku":"4044645596166","price":67.3,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-59619-lokpilot-5-dcc-mm-sx-m4-21mtc-nem660-no-wires-gauge-ho-o","title":"ESU 59619 LokPilot 5 DCC\/MM\/SX\/M4 21MTC NEM660 No Wires Gauge HO O","description":"\u003cp class=\"bodytext\"\u003eThe LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eLokPilot 5 decoders are offered with all common interfaces.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eModes\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 is a real multi-protocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eIt masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers. Auxiliary registers exist for control centers that can only program CVs from 1-255.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eMotorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe M4 protocol enables automatic registration at mfx®-compatible control centers. All 32 possible function keys are offered here.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 decoder recognizes the Märklin® braking distances as well as ZIMO® HLU \/ ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 decoder can be used on analog DC and AC railways.The decoder switches between the operating modes fully automatically \"on-the-fly\". Usually nothing needs to be set.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eFeatures\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eWe know that you want your locomotives to be as realistic as possible. Therefore, we packed the LokPilot 5 with function outputs. Depending on the interface version, each LokPilot 5 decoder offers at least 10 amplified function outputs with 250mA output current each. In the versions with PluX22 or 21MTC interface, 4 outputs are added to control servos or logic level outputs. All important lighting functions are available. The brightness of each output can be set separately. The decoder masters the automatic pressing and detaching when uncoupling for ROCO®, Krois® and Telex® couplings.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eMotor control\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe engine control of the LokPilot 5 has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors - the typical \"hum\" is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique \"Autotune\" function enables the decoder to be automatically calibrated to the motor. With up to 1.5A motor current, the LokPilot 5 decoder provides enough juice even for older motors.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eOperational safety\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eOn request, a PowerPack can be connected to the LokPilot 5 to bridge dirty rail sections.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eProtection\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eOf course, all function outputs and the motor output are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089387880553,"sku":"4044645596197","price":71.8,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-59610-lokpilot-5-dcc-mm-sx-m4-8-pin-nem652-gauge-ho-o","title":"ESU 59610 LokPilot 5 DCC\/MM\/SX\/M4 8-pin NEM652 Gauge HO O","description":"\u003cp class=\"bodytext\"\u003eThe LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eLokPilot 5 decoders are offered with all common interfaces.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eModes\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 is a real multi-protocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eIt masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers. Auxiliary registers exist for control centers that can only program CVs from 1-255.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eMotorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe M4 protocol enables automatic registration at mfx®-compatible control centers. All 32 possible function keys are offered here.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 decoder recognizes the Märklin® braking distances as well as ZIMO® HLU \/ ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 decoder can be used on analog DC and AC railways.The decoder switches between the operating modes fully automatically \"on-the-fly\". Usually nothing needs to be set.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eFeatures\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eWe know that you want your locomotives to be as realistic as possible. Therefore, we packed the LokPilot 5 with function outputs. Depending on the interface version, each LokPilot 5 decoder offers at least 10 amplified function outputs with 250mA output current each. In the versions with PluX22 or 21MTC interface, 4 outputs are added to control servos or logic level outputs. All important lighting functions are available. The brightness of each output can be set separately. The decoder masters the automatic pressing and detaching when uncoupling for ROCO®, Krois® and Telex® couplings.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eMotor control\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe engine control of the LokPilot 5 has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors - the typical \"hum\" is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique \"Autotune\" function enables the decoder to be automatically calibrated to the motor. With up to 1.5A motor current, the LokPilot 5 decoder provides enough juice even for older motors.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eOperational safety\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eOn request, a PowerPack can be connected to the LokPilot 5 to bridge dirty rail sections.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eProtection\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eOf course, all function outputs and the motor output are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089387946089,"sku":"4044645596104","price":104.3,"currency_code":"AUD","in_stock":true}]},{"product_id":"esu-59210-lokpilot-5-fx-dcc-mm-sx-8-pin-nem652-gauge-ho-o","title":"ESU 59210 LokPilot 5 Fx DCC\/MM\/SX 8-pin NEM652 Gauge HO O","description":"","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089388601449,"sku":null,"price":81.9,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-58219-lokpilot-5-fx-dcc-mm-sx-21mtc-nem660-gauge-ho-o","title":"ESU, 58219, LokPilot 5 Fx DCC\/MM\/SX, 21MTC NEM660, Gauge HO, O","description":"\u003cdiv id=\"jqtabs-6210-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Fx is a function decoder without motor output and therefore perfect for installation in control cars or function models. Because it talks DCC with RailCom® as well as Motorola® and Selectrix, it can be used with all common digital centers. He shares his flexible radio-onskey assignment and the manifold lighting effects with the other LokPilot 5 decoders from ESU.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Fx is supplied in three variants: In addition to the \"classic\" version with 8-pin NEM 652 harness, a variant for the 21MTC interface and with PluX22 interface is also available.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eModes\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Fx is a multi-protocol decoder. It masters the DCC data format as well as Motorola® and Selectrix®. In DCC format, 14-128 driving steps are as natural as 2- and 4-digit addresses. Up to 28 functions can be triggered. Thanks to RailComPlus® the de-coders register fully automatically at a suitable digital center (e.g. ECoS).\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eIt masters all DCC programming modes and can be used and programmed with all DCC-compatible digital centers: RailCom® also allows the CV values to be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255 (e.g. ROCO® multi-mouse).\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eMotorola® users benefit from up to 28 driving steps at 255 addresses. Three additional Motorola® addresses enable the triggering of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Fx Decoder erkennd ie Märklin®-Bremsstrecke n ee eensnso wie ZIMO®-HLU\/ZACK-Brems- commands or the Lenz® ABC system. Braking with DCC brake blocks or with equal voltage is also possible. In addition, it also \"stops\" with a Selectrix® brake diode.An AUTOMATIC ABC commuter train allows automatic commuting between two stations. Although this decoder does not have an engine output, this is also important with a function decoder in order to be able to synchronize control cars and motor cars.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 FX decoder can be used on analog DC and AC webs.The decoder switches \"on-the-fly\" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eFunctions\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Fx has been equipped with an astonishing number of function outputs. Depending on the cutting version, each LokPilot 5 Fx decoder offers at least 10 reinforced function outputs with 250mA output current each. In the versions with PluX22 or 21MTC interface, 4 outputs for controlling servos or logic level outputs are added. All important lighting functions are available. The brightness of each output can be set separately.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eInteraction\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Fx is designed for an interaction with the LokSound 5 and the LokPilot 5 decoders: for example, it is possible to equip the locomotive of a multiple unit with a LokSound 5 decoder and the control car with a LokPilot 5 Fx. Provided the same address, both behave absolutely identically. The identical arrangement of the CVs facilitates the tuning of the two decoders.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eOperational reliability\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eOn request, a PowerPack can be connected to the LokPilot 5 Fx to bridge dirty rail cuts.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eProtection\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eOf course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e\r\n\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089863147625,"sku":"4044645582190","price":126.7,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-59817-lokpilot-5-micro-dcc-mm-sx-m4-6-pin-direct-gauge-n-tt","title":"ESU 59817 LokPilot 5 Micro DCC\/MM\/SX\/M4 6-Pin Direct Gauge: N TT","description":"\u003cdiv id=\"jqtabs-5550-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"en\"\u003eThe LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed circuit boards and the latest manufacturing technology, it is so small with only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm) that it can be used even in very small locomotives Nominal sizes Z, N or TT can accommodate. Nevertheless, functionality and robustness were not spared compared to the larger versions.\u003c\/span\u003e\u003c\/p\u003e\r\nLokPilot 5 micro decoders are offered with all common interfaces. The versions with Next18 or PluX16 interface are a bit larger with a base area of ​​13.0mm x 9.2mm, but they also speak for the mfx®-compatible M4 protocol.\r\n\u003ch2\u003e\u003cspan class=\"tlid-translation translation\" lang=\"en\"\u003eModes\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"en\"\u003eThe LokPilot 5 micro is a real multi-protocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically.\u003c\/span\u003e\u003c\/p\u003e\r\nIt masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers. Auxiliary registers exist for control centers that can only program CVs from 1-255.\r\n\r\nMotorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.\r\n\r\nThe Next18 and PluX16 variants also allow automatic registration to mfx®-compatible control centers thanks to the M4 protocol. All 32 possible function keys are offered here.\r\n\r\nThe LokPilot 5 micro decoder recognizes the Märklin® braking distances as well as ZIMO® HLU \/ ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.\r\n\r\nThe LokPilot 5 decoder can be used on analog DC trains. The versions with Next18 or PluX16 can also be used on analog AC systems. The maximum speed can be set separately.\r\n\r\nThe decoder switches between the operating modes fully automatically \"on-the-fly\". Usually nothing needs to be set.\r\n\u003ch2\u003e\u003cspan class=\"tlid-translation translation\" lang=\"en\"\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"en\"\u003eWe know that you want your locomotives to be as realistic as possible. That is why we have equipped the LokPilot 5 micro with an astonishing number of function outputs. The variants with 6-pin or 8-pin wiring harness offer 4 amplified function outputs with 180mA output current each as well as two logic level outputs for servos or Susi. The versions with Next18 or PluX16 interface have a total of 6 amplified outputs and two logic level outputs. All important lighting functions are available. The brightness of each output can be set separately. The decoder masters the automatic pressing and detaching when uncoupling for ROCO®, Krois® and Telex® couplings.\r\nmotor control\u003c\/span\u003e\u003c\/p\u003e\r\nThe engine control of the LokPilot 5 micro has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors - the typical \"hum\" is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique \"Autotune\" function enables the decoder to be automatically calibrated to the motor. With up to 0.75A motor current, the LokPilot 5 micro decoder provides enough juice for the intended application scenarios.\r\n\u003ch2\u003e\u003cspan class=\"tlid-translation translation\" lang=\"en\"\u003eOperational safety\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"en\"\u003eOn request, a PowerPack can be connected to the LokPilot 5 micro to bridge dirty rail sections.\r\n\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003ch2\u003e\u003cspan class=\"tlid-translation translation\" lang=\"en\"\u003eProtection\u003c\/span\u003e\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003e\u003cspan lang=\"en\"\u003eOf course, the motor output and the function outputs are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/span\u003e\u003c\/p\u003e\r\n\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089905254505,"sku":"4044645598177","price":69.2,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-59110-lokpilot-5-fx-micro-dcc-mm-sx-m4-8-pin-nem652-gauge-n-tt","title":"ESU, 59110, LokPilot 5 FX Micro DCC\/MM\/SX\/M4, 8-pin NEM652, Gauge: N, TT","description":"\u003cdiv id=\"jqtabs-5550-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Fx micro and its “twin” LokPilot 5 Fx micro DCC is an extremely small function decoderwith a footprint of only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor:2.9 mm). It is used in all vehicles of nominal sizes N to H0 that do not need a motor output, but should still be able to switch lighting effects.LokPilot 5 Fx micro decoders are always offered with an 8-pin interface.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eModes\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Fx DCC “only” speaks the DCC protocol, but can also do it automatically with RailComPlus®On RailComPlus command stations.The LokPilot 5 Fx micro decoder recognizes the Märklin® braking distances as well as the ZIMO® HLU \/ ZACKCommands or the Lenz® ABC system. Also braking with DCC brake modules or with DC voltageis possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle trainenables automatic commuting between two train stations. This is also witha function decoder is important in order to be able to synchronize control cars and motor vehicles.The LokPilot 5 Fx decoder can be used on analog DC railways.The decoder switches between the operating modes fully automatically \"on-the-fly\".\u003c\/p\u003e\r\n\r\n\u003ch2\u003eFeatures\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Fx micro or LokPilot 5 Fx micro DCC has been equipped with an astonishing number of function outputs. There are 6 amplified function outputs with 180mA output current each and two logic level outputs for servos or Susi. The brightness of each output can be adjusted separately.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eOperational safety\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eIf required, a PowerPack can be connected to the LokPilot 5 Fx micro and LokPilot 5 Fx micro DCC to bridge dirty rail sections.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eProtection\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eOf course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e\r\n\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43089905287273,"sku":"4044645591109","price":69.2,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-59020-lokpilot-5-basic-8-pin-nem652-o-ho-scale","title":"ESU, 59020, LokPilot 5 Basic, 8-Pin NEM652, O\/HO Scale","description":"\u003cdiv id=\"jqtabs-5562-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cp class=\"bodytext\"\u003eWhile LokPilot 5 decoders can undoubtedly meet all imaginable requirements of even the most demanding experts, many model railway eras are looking for a robust, high-quality DCC decoder for your standard requirements, which should also be affordable.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Basic was developed with the aim of offering a modern decoder with a reasonable range of functions at a reasonable price.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Basic comes in two versions: In addition to a version with an 8-pin NEM interface, a version with 21MTC interface is also available. This makes the LokPilot 5 Basic particularly suitable for use in track H0 vehicles.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eModes\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Basic is a \"pure-bred\" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 20 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully automatically to a suitable digital center.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eIt masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Basic Decoder detects the Märklin® brake distances as well as the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible.The LokPilot 5 Basic Decoder can be used on analog DC webs. The maximum speed can be set separately.The decoder switches \"on-the-fly\" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eFunctions\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Basic has 4 reinforced function outputs in each version. In the 21MTC interface, there are 8 logic-level outputs at the interface, two of which are also suitable for controlling servos. All important lighting functions are available. The brightness of each output can be set separately.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eMotor\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe motor control of the LokPilot 5 Basic delivers up to 0.9A continuous current. A variable PWM clock frequency from 10kHz to 50kHz ensures super-quiet operation, especially for bell anchor motors – The typical \"hum\" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique \"Autotune\" function allows the decoder to be automatically measured against the motor.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eOperational reliability\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eOn request, a PowerPack can be connected to the LokPilot 5 Basic to bridge dirty rail cuts.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eProtection\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eOf course, all function outputs as well as the motor output are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e\r\n\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43092561952873,"sku":"4044645590201","price":57.5,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-59029-lokpilot-5-basic-21mtc-nem660-o-ho-scale","title":"ESU, 59029, LokPilot 5 Basic, 21MTC NEM660, O\/HO Scale","description":"\u003cdiv id=\"jqtabs-5562-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cp class=\"bodytext\"\u003eWhile LokPilot 5 decoders can undoubtedly meet all imaginable requirements of even the most demanding experts, many model railway eras are looking for a robust, high-quality DCC decoder for your standard requirements, which should also be affordable.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Basic was developed with the aim of offering a modern decoder with a reasonable range of functions at a reasonable price.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Basic comes in two versions: In addition to a version with an 8-pin NEM interface, a version with 21MTC interface is also available. This makes the LokPilot 5 Basic particularly suitable for use in track H0 vehicles.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eModes\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Basic is a \"pure-bred\" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 20 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully automatically to a suitable digital center.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eIt masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Basic Decoder detects the Märklin® brake distances as well as the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible.The LokPilot 5 Basic Decoder can be used on analog DC webs. The maximum speed can be set separately.The decoder switches \"on-the-fly\" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eFunctions\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 Basic has 4 reinforced function outputs in each version. In the 21MTC interface, there are 8 logic-level outputs at the interface, two of which are also suitable for controlling servos. All important lighting functions are available. The brightness of each output can be set separately.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eMotor\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe motor control of the LokPilot 5 Basic delivers up to 0.9A continuous current. A variable PWM clock frequency from 10kHz to 50kHz ensures super-quiet operation, especially for bell anchor motors – The typical \"hum\" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique \"Autotune\" function allows the decoder to be automatically measured against the motor.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eOperational reliability\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eOn request, a PowerPack can be connected to the LokPilot 5 Basic to bridge dirty rail cuts.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eProtection\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eOf course, all function outputs as well as the motor output are protected against overload. We want you to enjoy your decoder for as long as possible.\u003c\/p\u003e\r\n\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43092562018409,"sku":"4044645590294","price":57.5,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-54686-lokpilot-micro-v4-0-dcc-motor-control-decoder-next18-interface-n-scale","title":"ESU 54686 LokPilot Micro V4.0 DCC Motor Control Decoder Next18 Interface N Scale","description":"","brand":"ESU","offers":[{"title":"Default Title","offer_id":43092578566249,"sku":"4044645546864","price":61.7,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-59629-lokpilot-5-dcc-21mtc-nem660-gauge-h0-0","title":"ESU 59629 LokPilot 5 DCC 21MTC NEM660 Gauge H0 0","description":"\u003cdiv id=\"jqtabs-5920-0\" class=\"ui-tabs-panel ui-widget-content ui-corner-bottom\"\u003e\r\n\u003cdiv\u003e\r\n\u003cdiv class=\"content-text\"\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 DCC is the \"twin brother\" of the LokPilot 5. The two share almost all characteristics, however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility comes with a cheaper price.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eLokPilot 5 decoders are offered with all common interfaces.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eModes\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 DCC is a \"pure-bred\" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders register automatically with a suitable DCC system like the ESU CabControl.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe decoder accepts all DCC programming modes and thanks to RailCom® the CV values ​​can be read on the main track with RailCom equipped DCC systems. For command stations that only program the CVs from 1-255 auxiliary CV registers exist.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 DCC decoder recognizes the Märklin® braking sections as well as the ZIMO® HLU \/ ZACKCommands or the Lenz® ABC system. Also braking with DCC brake modules or with DC voltageis possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle trainenables automatic commuting between two train stations.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe LokPilot 5 DCC decoder can be used on analog DC trains. The top speedcan be set separately.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eThe decoder switches between the operating modes fully automatically \"on-the-fly\".\u003c\/p\u003e\r\n\r\n\u003ch2\u003eFeatures\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eWe know that you want your locomotives to be as realistic as possible. Therefore we have the LokPilot 5DCC packed with function outputs. Depending on the interface version, each LokPilot offers 5 DCCDecoder at least 10 amplified function outputs with 250mA output current each. In the executionswith PluX22 or 21MTC interface there are 4 outputs to control servos orLogic level outputs added. All-important lighting functions are available. The brightness of each outputcan be set separately. The decoder masters automatic pushing and pullingwhen uncoupling for ROCO®, Krois® and Telex® couplings.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eMotor control\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eThe engine control of the LokPilot 5 DCC has been fundamentally improved again. A variably adjustablePWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors.Operation - The typical “hum” is a thing of the past. The load control now has up to10 CVs  which can be adjusted for difficult cases. The unique \"Autotune\" function enablesthe automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to 1.5A of motor current. Enough juice even for older motors.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eOperational safety\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eOn request, a PowerPack can be fitted to the LokPilot 5 DCC to bridge dirty rail sections.\u003c\/p\u003e\r\n\r\n\u003ch2\u003eProtection\u003c\/h2\u003e\r\n\u003cp class=\"bodytext\"\u003eOf course, all function outputs and the motor output are protected against overload.\u003c\/p\u003e\r\n\u003cp class=\"bodytext\"\u003eWe want you to enjoy your decoder for as long as possible.\u003c\/p\u003e\r\n\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e","brand":"ESU","offers":[{"title":"Default Title","offer_id":43092738670697,"sku":"4044645596296","price":77.0,"currency_code":"AUD","in_stock":false}]},{"product_id":"esu-59219-lokpilot-5-fx-dcc-mm-sx-21mtc-nem660-gauge-ho-o","title":"ESU 59219 LokPilot 5 Fx DCC\/MM\/SX 21MTC NEM660 Gauge HO O","description":"","brand":"ESU","offers":[{"title":"Default Title","offer_id":47733809021033,"sku":"4044645592199","price":81.9,"currency_code":"AUD","in_stock":true}]}],"url":"https:\/\/auroratrains.com.au\/collections\/digital-decoders-esu.oembed","provider":"Aurora Trains","version":"1.0","type":"link"}